L
-
ATC
LearnATC
Функції
Симулятор
Питання
Правопис
Слухання
Сценарії
Вікі
Інструменти
Льотні школи
Льотні інструктори
Аеродроми
Частоти
Blog
Вікі
Інше
B2B
Часті запитання
Умови обслуговування
Конфіденційність
Ціни
Увійти
Реєстрація
Now let's decode this
broadcast
element by element:
Identification: Information Juliet
This is the letter "J." It tells
ATC
and you that you both have the same current information.
If you call the tower after hearing this, you begin with "Information Juliet."
Time: One Three Zero Five
UTC
This
ATIS
was recorded at 13:05
UTC
If it is now 13:45 UTC, this ATIS is 40 minutes old. You should expect an update soon.
This helps you judge whether minor deviations in wind or pressure are acceptable.
Runway: Runway Three Hundred in use
The active runway is 30, oriented roughly north-south (300° magnetic).
This is the runway where you will depart and where arriving aircraft will land.
If wind changes significantly, this may change. Re-monitor
ATIS
if you are waiting.
Transition Level:
Flight Level
Eighty (FL080)
Below FL080, pilots use local
QNH
(as set by
ATC
.
At or above FL080, pilots use standard 1013 hPa.
This protects vertical separation in the upper air.
QNH
: Niner Niner Two
Local pressure setting is 992 hPa.
This is lower than standard (1013), indicating lower air pressure (likely deteriorating weather).
You must set your altimeter to 992 hPa for all height clearances below the transition level.
The operation was aborted due to timeout
Помилка сповіщення
Натисніть, щоб закрити
The operation was aborted due to timeout
Помилка сповіщення
Натисніть, щоб закрити