Readbacks

Definition

A readback is the verbatim repetition of an instruction, clearance, or piece of information received from air traffic control (ATC), spoken back by the pilot. Readbacks are essential to ensure mutual understanding and confirmation of critical messages in aviation communication.

Purpose

  • Confirm that the pilot has correctly received and understood the clearance or instruction
  • Allow the controller to verify accuracy and correct any misunderstanding
  • Prevent errors that could lead to runway incursions, airspace violations, or loss of separation
  • Fulfill legal and procedural requirements for safety-critical communication

What Must Be Read Back (Mandatory)

Instruction Type Readback Required? Example
Clearances (e.g., taxi, takeoff, landing) ✅ Yes “Cleared for takeoff runway 27”
Runway entry/crossing instructions ✅ Yes “Cross runway 09, OE-XYZ”
Level/altitude/FL clearances ✅ Yes “Climb FL80, OE-CVC”
Heading or vector instructions ✅ Yes “Turn right heading 210”
Frequency changes ✅ Yes “Contact Approach on 124.7”
Squawk codes ✅ Yes “Squawk 4725”
Hold short or conditional clearances ✅ Yes “Hold short runway 16, behind landing traffic”

What May Be Acknowledged with a Simple "Roger" or "Wilco"

Message Type Readback Not Required (but confirmation helpful)
Traffic information (FIS or advisory) “Roger” / “Copy traffic”
Weather updates “Roger ATIS Information Bravo”
Position requests “Reporting abeam November now”
General instructions (e.g., standby) “Wilco” / “Standby”

Note: In busy environments or under training, full repetition is often encouraged even if not mandatory.

Readback Best Practices

  • ✅ Repeat exactly what was said — especially numbers, runway designators, and call signs
  • ✅ Use standard phraseology
  • ✅ Confirm your aircraft call sign at the end
  • ❌ Never paraphrase or summarize a clearance
  • ❌ Avoid cutting off the controller or transmitting too early

Correct Example:
ATC: “OE-XYZ, cleared to land runway 08, wind 090 degrees 6 knots”
Pilot: “Cleared to land runway 08, OE-XYZ”

Handling Readback Errors

If the readback is incorrect, ATC will issue a correction:

ATC: “Negative, OE-XYZ, cleared to land runway 09”
Pilot: “Cleared to land runway 09, OE-XYZ”

Controllers are trained to listen carefully for readback errors and take immediate corrective action.

Conditional Clearances

Readbacks must include the condition in full:

ATC: “After landing Cessna, line up runway 27”
Pilot: “After landing Cessna, line up runway 27, OE-ABC”

Omitting the condition is a critical error and can lead to safety violations.

Phraseology Tips

  • Avoid casual responses like “OK” or “Got it”
  • Stick to standardized phrases:
    • “Cleared to enter controlled airspace”
    • “Heading one two zero, climbing FL70”
    • “Squawk 7000, OE-FGH”

Why It Matters

  • ✔️ Accurate readbacks are a core pillar of aviation safety
  • ✔️ Misread or misunderstood clearances have led to major incidents
  • ✔️ Proper readbacks build trust and clarity between pilots and controllers






We use cookies and localStorage to ensure app functionality. Read more in our Privacy Policy

Decline