Now let's decode this broadcast element by element:
Identification: Information Juliet
  • This is the letter "J." It tells ATC and you that you both have the same current information.
  • If you call the tower after hearing this, you begin with "Information Juliet."
Time: One Three Zero Five UTC
  • This ATIS was recorded at 13:05 UTC
  • If it is now 13:45 UTC, this ATIS is 40 minutes old. You should expect an update soon.
  • This helps you judge whether minor deviations in wind or pressure are acceptable.
Runway: Runway Three Hundred in use
  • The active runway is 30, oriented roughly north-south (300° magnetic).
  • This is the runway where you will depart and where arriving aircraft will land.
  • If wind changes significantly, this may change. Re-monitor ATIS if you are waiting.
Transition Level: Flight Level Eighty (FL080)
  • Below FL080, pilots use local QNH (as set by ATC .
  • At or above FL080, pilots use standard 1013 hPa.
  • This protects vertical separation in the upper air.
QNH: Niner Niner Two
  • Local pressure setting is 992 hPa.
  • This is lower than standard (1013), indicating lower air pressure (likely deteriorating weather).
  • You must set your altimeter to 992 hPa for all height clearances below the transition level.






The operation was aborted due to timeout
Fehler BenachrichtigungZum Schließen anklicken
The operation was aborted due to timeout
Fehler BenachrichtigungZum Schließen anklicken